Register | Log in | FAQ      [?] 

Scandinavian Journal of Metallurgy

Articles from the last few issues of Scandinavian Journal of Metallurgy © Blackwell Publishing
  • Impact of pre-aging on the tensile and bending properties of AA 6061
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 318-325.
  • Recent change in refining process in Nippon Steel Corporation and metallurgical phenomena in the new process
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 326-333.
  • Thermodynamic modeling of ammoniacal nickel sulphate solutions
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 334-339.
  • Physical modeling simulations of refining processes in Brazilian Steel Industry
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 340-352.
    by Seshadri, Varadarajan, Silva, Carlos Antonio, Da Silva, Itavahn Alves
  • Modeling Al2O3 inclusion separation across steelslag interfaces
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 353-362.
  • Copper electrodeposition onto extended surface area electrodes and the treatment of copper-containing waste streams
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 363-368.
  • Thermodynamics of lanthanide halides and application to high-temperature processes
    Scandinavian Journal of Metallurgy, Vol. 34, No. 6. (December 2005), pp. 369-375.
  • Mathematical modelling of the injection of coke oven gas into a blast furnace tuyere
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 269-275.
    by Per Hellberg, Jonsson, Par G Jonsson
  • Effect of simultaneous addition of CaO-Al2O3 flux and CaSi on the modification of inclusions in aluminium-killed steel
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 276-282.
    by NK Das, N Sen, M Ghosh, R Sau
  • Corrosion mechanism and kinetic behaviour of MgO-C refractory material in contact with CaO-Al2O3-SiO2-MgO slag
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 283-292.
    by Sune Jansson, Voicu Brabie, Par Jonsson
  • Solid Oxide Membrane (SOM) technology for environmentally sound production of tantalum metal and alloys from their oxide sources
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 293-301.
    by Ajay Krishnan, Xiong G Lu, Uday B Pal
  • Influence of boron on microstructure properties of 13 chromium white irons
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 302-311.
    by Stanka T Petrovic, Srdjan Markovic, Momcilo Martinovic
  • Computer simulation of solution and growth processes during the initial stage of liquid phase sintering of tungsten heavy metal
    Scandinavian Journal of Metallurgy, Vol. 34, No. 5. (October 2005), pp. 312-316.
    by Lars Ekbom, Tomas Antonsson, Mikael Ekbom
  • Thermal fatigue in hot-working tools
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 221-231.
    by Johnny Sjostrom, Jens Bergstrom
  • Control of defects during continuous casting of line pipe (API) quality steels
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 232-240.
    by N Pradhan, N Banerjee, BB Reddy, SK Sahay, DS Basu, PK Bhor, S Das, S Bhattyacharya
  • Flotation and entrainment behavior of minerals in talc-calcite separation
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 241-244.
    by Unal Akdemir, Taki Guler, Guvengez Yildiztekin
  • Thermal analysis of eutectic reactions of white cast irons
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 245-249.
    by Alexander Mazur, Michael M Gasik, Vladislav I Mazur
    posted by 1 person xaviereece
  • Kinetic parameters for the process of sulfatization roasting and leaching of copper-lead matte
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 250-255.
    by Dusan Minic, Nada Strbac, Ivan Mihajlovic, Desimir Petkovic, Zivan Zivkovic
  • Steel research and development in the aspect for a sustainable society
    Scandinavian Journal of Metallurgy, Vol. 34, No. 4. (August 2005), pp. 256-267.
    by Tooru Matsumiya
  • Simulation of thermal fatigue in hot strip mill work rolls
    Scandinavian Journal of Metallurgy, Vol. 34, No. 3. (June 2005), pp. 175-191.
  • Simulation and optimisation of an industrial process of sub-critical spheroidization annealing of a 100Cr6 steel
    Scandinavian Journal of Metallurgy, Vol. 34, No. 3. (June 2005), pp. 192-204.
    by Carlo Mapelli, Roberto Venturini, Marco Boniardi
  • Final stage of reduction of iron ores by hydrogen
    Scandinavian Journal of Metallurgy, Vol. 34, No. 3. (June 2005), pp. 205-212.
    by R Fruehan, Y Li, L Brabie, E- Kim
  • A study on the structural analysis of aluminium drosses and processing of industrial aluminium salty slags
    Scandinavian Journal of Metallurgy, Vol. 34, No. 3. (June 2005), pp. 213-219.
    by ABY Hazar, Muhlis N Saridede, Mustafa Cigdem
  • Glimmers of research in metallurgy
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 66-78.
    by Lauri Holappa
  • Changing paradigm of metal separation technology for steel production
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 79-88.
    by Toshihiko Emi
  • Observation and measurement of bubble separation at liquid steel-slag interfaces
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 89-99.
    by V Chevrier, A Cramb
  • Industrial slag chemistry: A case study of computational thermodynamics
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 100-107.
    by Pekka Taskinen, Alan Dinsdale, John Gisby
  • Hydrogen reduction of complex oxides-a novel route toward the production of nanograined alloys and intermetallics
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 108-115.
    by Ricardo Morales, Francisco J Tavera, Ragnhild E Aune, Seshadri Seetharaman
  • Dynamic model of liquid levels in the blast furnace hearth
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 116-121.
    by Henrik Saxen, Johnny Brannbacka
  • Kinetics of carbothermic reduction reactions under heat transfer control: modelling results
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 122-130.
    by Chris C Pistorius
  • Interfacial reaction of nitrogen with molten iron: a theoretical study
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 131-136.
    by Joonho Lee, Kazuki Morita
  • Motion of fine particles in liquid caused by interfacial tension gradient in relation to metals separation technologies
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 137-142.
    by Kusuhiro Mukai, Taishi Matsushita, Seshadri Seetharaman
  • Reduction of Chilean copper slags: a case of waste management project
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 143-149.
  • Kinetics of reduction of lead smelting slags with solid carbon
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 150-157.
    by Nikolai N Kinaev, Evgueni Jak, Peter C Hayes
  • Separation, settling and flow phenomena in electric matte smelting of Cu-Ni concentrates
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 158-163.
    by Hurman H Eric
  • Phase equilibrium and thermodynamic properties of SiO2-CaO-FeOx slags for copper smelting-research achievements of Professor Yoichi Takeda
    Scandinavian Journal of Metallurgy, Vol. 34, No. 2. (April 2005), pp. 164-174.
    by Katsunori Yamaguchi, Shigeru Ueda, Yoichi Takeda
  • Observations about tempered martensite embrittlement
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 1-6.
    by Juha Pietikainen
  • Influences of flame configurations on flame properties and NO emissions in combustion with high-temperature air
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 7-15.
    by Weihong Yang, Magnus Mortberg, Wlodzimierz Blasiak
  • Solidification microstructure and heterogeneous nucleation phenomena in cast SiCp-reinforced hypereutectic Al-Si alloy composites
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 16-21.
    by Stefanos M Skolianos, Azarias A Mavropoulos
  • Mechanism study on solid-state reduction in the Fe2O3-NiO-Cr2O3-C system using thermal analyses
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 22-30.
    by Ping Ma, Bo Lindblom, Bo Bjorkman
  • Experimental studies on solid-state reduction of pickling sludge generated in the stainless steel production
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 31-40.
    by Ping Ma, Bo Lindblom, Bo Bjorkman
  • Process model of inclusion separation in a stirred steel ladle
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 41-56.
    by M Hallberg, PG Jonsson, TLI Jonsson, R Eriksson
  • Dry comminution and liberation with microwave assistance
    Scandinavian Journal of Metallurgy, Vol. 34, No. 1. (February 2005), pp. 57-63.
    by Yanmin Wang, Eric Forssberg
  • On the standard Gibbs energy of formation of CoO
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 305.
    by Patrik Fredriksson, Seshadri Seetharaman
  • Optimizing parameters of supervised learning techniques (ANN) for precise mapping of the input-output relationship in TMCP steels
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 310.
    by Shubhabrata Datta, Malay K Banerjee
  • Kinetic modelling of chalcocite particle oxidation
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 316.
    by Ivan Mihajlovic, Nada Strbac, Zivan Zivkovic
  • Statistical analysis in Turkish chromite mining
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 322.
    by Oktay Bayat, Volkan Arslan
  • Exodus stochastic method application in the continuous reheating furnace control system
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 328.
    by Milan Honner, Zdenek Vesely, Michal Svantner
  • Surface tension of molten bismuth at different oxygen partial pressure with the sessile drop method
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 338.
    by Zhangfu Yuan, Jianfeng Fan, Jing Li, Jiajun Ke, Kusuhiro Mukai
  • A numerical simulation of the DC continuous casting using average heat capacity
    Scandinavian Journal of Metallurgy, Vol. 33, No. 6., 347.
    by AIN Abdel, Yahia Khadraoui
  • Note: You may cite this page as: http://www.citeulike.org/journal/mksg-sjm

    Result page: 1 2 Next RIS BibTeX
    CiteULike organises scholarly (or academic) papers or literature and provides bibliographic (which means it makes bibliographies) for universities and higher education establishments. It helps undergraduates and postgraduates. People studying for PhDs or in postdoctoral (postdoc) positions. The service is similar in scope to EndNote or RefWorks or any other reference manager like BibTeX, but it is a social bookmarking service for scientists and humanities researchers.